numbers
1d6f6bed9e
Lower RGB_MATRIX_VAL_STEP to 1, fix info.json syntax errors, and document the vial-qmk build path.
115 lines
4.3 KiB
C
115 lines
4.3 KiB
C
|
|
|
|
#pragma once
|
|
|
|
#undef STM32_HSECLK
|
|
#define STM32_HSECLK 16000000
|
|
|
|
#define TAPPING_TOGGLE 2
|
|
#define DYNAMIC_KEYMAP_LAYER_COUNT 6
|
|
#define DYNAMIC_KEYMAP_MACRO_COUNT 15
|
|
|
|
|
|
|
|
#define MATRIX_ROWS 10
|
|
#define MATRIX_COLS 7
|
|
/*
|
|
* Keyboard Matrix Assignments
|
|
*
|
|
* Change this to how you wired your keyboard
|
|
* COLS: AVR pins used for columns, left to right
|
|
* ROWS: AVR pins used for rows, top to bottom
|
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
|
*
|
|
*/
|
|
|
|
#define MATRIX_ROW_PINS { C8, C7, B2, A6, A5 }
|
|
#define MATRIX_COL_PINS { B13, B14, B15, C6, C9, A8, C12 }
|
|
#define MATRIX_ROW_PINS_RIGHT { A1, B7, C5, B0, B1 }
|
|
#define MATRIX_COL_PINS_RIGHT { B8, C10, C8, C7, C6, B15, B14 }
|
|
|
|
//#define MATRIX_ROW_PINS { A1, B7, C5, B0, B1 }
|
|
//#define MATRIX_COL_PINS { B8, C9, C8, C7, C6, B15, B14 }
|
|
//#define MATRIX_ROW_PINS_RIGHT { C8, C7, B2, A6, A5 }
|
|
//#define MATRIX_COL_PINS_RIGHT { B13, B14, B15, C6, C9, A8, C12 }
|
|
|
|
#define DIODE_DIRECTION COL2ROW
|
|
#define DEBOUNCE 5
|
|
//#define FORCE_NKRO
|
|
|
|
|
|
//#define LOCKING_SUPPORT_ENABLE
|
|
//#define LOCKING_RESYNC_ENABLE
|
|
//#define TAPPING_TERM 100
|
|
//#define TAP_CODE_DELAY 15
|
|
|
|
//#define USB_POLLING_INTERVAL_MS 1
|
|
//#define QMK_KEYS_PER_SCAN 4
|
|
|
|
//#define EE_HANDS
|
|
|
|
#define ENCODER_MAP_KEY_DELAY 10
|
|
|
|
#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
|
|
#define SERIAL_USART_TX_PIN A9 // USART TX pin
|
|
#define SERIAL_USART_RX_PIN A10 // USART RX pin
|
|
//#define USART1_REMAP // Remap USART TX and RX pins on STM32F103 MCUs, see table below.
|
|
//#define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve.
|
|
// Check if this feature is necessary with your keyboard design and available on the mcu.
|
|
#define SELECT_SOFT_SERIAL_SPEED 5 // or 0, 2, 3, 4, 5
|
|
// 0: 460800 baud
|
|
// 1: 230400 baud (default)
|
|
// 2: 115200 baud
|
|
// 3: 57600 baud
|
|
// 4: 38400 baud
|
|
// 5: 19200 baud
|
|
#define SERIAL_USART_DRIVER SD1 // USART driver of TX and RX pin. default: SD1
|
|
#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
|
|
#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
|
|
#define SERIAL_USART_TIMEOUT 20 // USART driver timeout. default 20
|
|
|
|
#define MASTER_RIGHT
|
|
|
|
#define SPLIT_HAND_PIN C1
|
|
//#define SPLIT_LAYER_STATE_ENABLE
|
|
#define SPLIT_HAND_PIN_LOW_IS_LEFT
|
|
|
|
|
|
//#define SPLIT_LED_STATE_ENABLE
|
|
//#define VIA_HAS_BROKEN_KEYCODES
|
|
|
|
|
|
|
|
|
|
# define WS2812_PWM_DRIVER PWMD3 // default: PWMD2
|
|
# define WS2812_PWM_CHANNEL 2 // default: 2
|
|
# define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
|
|
# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
|
|
# define WS2812_DMA_CHANNEL 5 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
|
|
//# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
|
|
#define RGB_MATRIX_SLEEP
|
|
#define RGB_MATRIX_VAL_STEP 1
|
|
|
|
#define WEAR_LEVELING_LOGICAL_SIZE 2048
|
|
#define WEAR_LEVELING_BACKING_SIZE (WEAR_LEVELING_LOGICAL_SIZE * 2)
|
|
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 2047
|
|
|
|
/* disable these deprecated features by default */
|
|
//#define NO_ACTION_MACRO
|
|
//#define NO_ACTION_FUNCTION
|
|
|
|
// #define SPLIT_USB_DETECT
|
|
// #define SPLIT_USB_TIMEOUT 2000
|
|
#define USB_POLLING_INTERVAL_MS 1
|
|
// #define SPLIT_MODS_ENABLE
|
|
// #define SPLIT_USB_TIMEOUT_POLL 10
|
|
// #define SPLIT_WATCHDOG_TIMEOUT 3000
|
|
// #define SPLIT_WATCHDOG_ENABLE
|
|
#define SKIP_QF
|
|
|
|
// #define USB_SUSPEND_WAKEUP_DELAY 200 // 单位ms，建议200-500
|
|
// #define RTT_DEBUG_QF
|
|
// #define MASTER_RIGHT // 右半固定为主机
|
|
#define NO_USB_STARTUP_CHECK
|